All of the extra time spent at home on the weekends has given me lots of time to craft with the kids. They have started playing the game Among Us so I came up with this Among Us plushie pattern for them. Made out of felt, this is an easy sewing project for kids.
Sewing is an excellent handicraft for kids of all ages! This project can used with either hand sewing or machine sewing.
My oldest two who are 10 & 12 made it by themselves. However, even younger kids can make this easily with a little help! My 6 year old cut out the pieces and operated the foot pedal while I guided the fabric in the sewing machine.
I used a sewing machine for this project but this would also be a great project for hand sewing. Felt is great for beginner sewing because the edges do not fray.
I have included a free printable pattern and instructions so you can make them at home! Click on the link at the bottom of this post to download.
Among Us Plushie
Made out of felt, this is an easy sewing project for kids.
Amung Us Plushie Free pattern (link to download in the notes below)
Sewing Machine / sewing needle
1. Sew goggle highlight onto goggles.
2. Sew goggles onto body
3. Sew body pieces together leaving a 1 inch gap at the top.
4. Stuff with polyfil and sew opening closed.
5. Sew together backpack pieces leaving the top open.
6. Stuff backpack with polyfil and sew top closed.
7. Attach backpack onto backside with hot glue or hand sew.
Fall is when I pick up my knitting needles again and enjoy cozying up on the couch with a knitting project. I love the look of leather tags on knit/crochet items. I came up with this DIY version that is easy to create at home with some leather and heat transfer vinyl. I am giving you the free SVG file below too!
I made my tags out of leather from a thrifted bag. I am always on the lookout for leather bags and jackets when thrifting! To make these tags you will need leather (or faux leather), Heat transfer vinyl, my free cut file which you’ll find below, and a hammer and nail.
First you will cut a 1 inch by 2 inch rectangle out of the leather. Then using the hammer and Nail you will punch a hole in each corner of the tag. Be careful not to punch too close to the edge or the hole could rip. Use a piece of scrap wood under while you hammer.
Now you will cut your design out of vinyl and apply it to your tag. Make sure when weeding the vinyl to remove the outline as shown below. It is a bit tedious because it is such a small piece. I used a hair straightener to apply my vinyl to the leather. It works great for small applications like this! I just put parchment paper between the straightener and the leather.
Now you get to sew your finished tag on and admire how professional your handknit looks!
If you make your own tags I’d love to see how they look on your hand knit or Crochet creations! Tag me on Instagram @handmadejoydesigns #handmadejoyblog
This free fall print is one of my favourite fall quotes from my favourite book, Anne of Green Gables. Perfect to frame and put up with your fall decor!
“I’m so glad I live in a world where there are Octobers”
— Anne of Green Gables
Click on the link at the bottom of this post to download the free PDF print. I like to print my printables at home on white cardstock. However, you can also have it printed at a copy shop if you prefer.
Free Happy Fall Y’all SVG! For this week’s Freebie I have an svg cut file for you. This cute svg file is perfect for making Fall pillows, mugs and signs. Scroll down to the bottom of this post for the link to download.
I love making seasonal signs and pillows with my Cricut machine. It is so easy to make decor that you can swap out for every season.
A great place to find signs is the thrift store or garage sales. I always scour the thrift stores for wooden signs that I can re-use. I just paint over the design with white paint and then apply my own vinyl design over top!
“Life starts all over again when it gets crisp in the fall.” ~ F. Scott Fitzgerald
The temperatures have dropped over the last week and it feels like Fall is around the corner! Fall is my favourite season. I love the changing leaves and crisp weather, it just makes me want to cosy up with a cup of tea. Today I’ve got a free fall phone wallpaper for you!
To download the wallpaper to your phone you will need to click and hold the image below and save it to your phone. Then you’ll just set it as your wallpaper.
Starting this month I’m going to be giving away a freebie every Friday. Make sure to keep checking back every week for Free cut files, graphics and printables!
Are your kids going back to school? In our area the Covid cases are low so kids are going back to school in September. However they are required to wear masks in the common areas of school. I’ve made these pouches to attach to their backpacks so that their masks are easy to reach when they arrive at school! Below I have included a quick tutorial to show you how I made them.
Supplies needed: main fabric and lining fabric, velcro, amd ribbon or bias tape. The mask fabric I used is available in my Spoonflower collection.
First You will cut out 2 pieces of fabric 12 inches x 6 inches – one main fabric and one lining fabric. I wanted to have a rounded edge so I traced a lid and rounded the corners of the top. You will also cut a 3.5 inch piece of ribbon or bias tape for the loop.
Next you will sew your fabric right sides together, leaving a small gap so you can turn it right-side-out after.
Turn right-side-out and fold the bottom up to form the pouch. You will pin your ribbon/bias tape in place along the side. Sew along the edge to secure. Final step is to sew on your velcro. You can do this before you sew the pouch if you find that easier.
I used a key ring to attach it to a zipper on my son’s backpack. I love that they will always have their mask handy when they enter school in the morning!
If you would have told me a year ago that I would be sewing a stack of cloth masks for my family, I would have thought you were crazy! But here we are. I am finding there is a shortage of elastic now that everyone is making masks, so I had to get creative when making mine.
I bought some stretchy headbands and cut them up into strips to make my ear loops. They work great and are so soft on the ears!
I was able to get four pairs of ear loops from each headband. However, that would vary depending on the stretch of the headband fabric.
I used Made Every Day’s Fabric Face Mask free pattern to make my masks. The only change I made was to do ears loops instead of the around the head ties.
I hope you try this is you are having trouble finding elastic to make masks or if you just want to try something that is softer on the ears! What is your favourite fabric mask pattern? I am going to try the 3D fitted mask style next.
We are cleaning our trailer and packing it up for our first camping trip of the season. I recently bought a wood burner and wanted to make a cutting board for the camper. These little bamboo cutting boards from the Dollar Tree are the perfect size for camping. I also picked up a bamboo spatula to customize for the camper.
For the cutting board, I used my HAPPY CAMPER cut file. I printed off the png clipart file and used graphite paper to transfer the design onto the cutting board. For the spatula I just sketched the roasting marshmallows with pencil and then traced over with the wood burner.
I am new to wood burning but have had fun playing with it. I bought this basic Walnut Hollow wood burner from Michaels. It comes with a few different tips.
I can’t wait to try it out while we are camping this weekend! These would make great gifts for your friends and family.
Do you have a wood burner? What are your favourite projects to use it for?
When we got our little Lucy I wasn’t that impressed with the selection of dog collars in the pet store. I decided to try making a collar but found it hard to source the hardware without buying big quantities of them in bulk. When browsing in the Dollar Tree I saw their dog collars and thought I would try using their hardware to make my own collar.
Supplies needed: Dog collar, seam ripper, ribbon
This time I used a mint satin ribbon. The first collar I made her was with a velvet ribbon. The velvet one is probably my favourite that I’ve made. I am on the hunt for wider velvet ribbon so I can make a new one.
Remember to take photos of the collar before your take it apart so you will know how to put it back together!!
First you need to use a seam ripper to take out the seams of your collar. There are 2 areas sewn on the collar.
Once you have done that, remove the buckles and D ring. Next cut a piece of ribbon the same length as the collar.
Place the ribbon on top of the collar and sew along each side to secure it.
You will now put it back together and sew to secure everything in place. That’s it, you’re done! Now go try it on your pup!
Just want to mention that Lucy’s sweet dog tag was ordered from the Etsy Shop Field Trip. I love it so much! We have had it for almost three years now and it is still in perfect shape.
I decided to add her name with some heat transfer vinyl. Don’t throw away those vinyl scraps from other projects!
This is such an easy and inexpensive project. I love that I can change up her collar for holidays or just when they get dirty without having to spend a lot every time!