DIY Mask Pouch – Sewing Tutorial

0 Flares Twitter 0 Facebook 0 Filament.io 0 Flares ×

Are your kids going back to school? In our area the Covid cases are low so kids are going back to school in September. However they are required to wear masks in the common areas of school. I’ve made these pouches to attach to their backpacks so that their masks are easy to reach when they arrive at school! Below I have included a quick tutorial to show you how I made them.

Supplies needed: main fabric and lining fabric, velcro, amd ribbon or bias tape. The mask fabric I used is available in my Spoonflower collection.

First You will cut out 2 pieces of fabric 12 inches x 6 inches – one main fabric and one lining fabric. I wanted to have a rounded edge so I traced a lid and rounded the corners of the top. You will also cut a 3.5 inch piece of ribbon or bias tape for the loop.

Next you will sew your fabric right sides together, leaving a small gap so you can turn it right-side-out after.

Turn right-side-out and fold the bottom up to form the pouch. You will pin your ribbon/bias tape in place along the side. Sew along the edge to secure. Final step is to sew on your velcro. You can do this before you sew the pouch if you find that easier.

I used a key ring to attach it to a zipper on my son’s backpack. I love that they will always have their mask handy when they enter school in the morning!